Aurp Setup - Netopia R6100 Reference Manual

13-8 User's Reference Guide
If another router is already present on the LocalTalk network that you will be connecting to the Netopia
R6000 Series, use the zone name and network number used by that router for that LocalTalk network.
Otherwise, your LocalTalk network may experience routing conflicts.
As an alternative, you can set LocalTalk seeding to soft seeding and let the Netopia R6000 Series receive
the zone name and network number from the other router.
Select LocalTalk Net Number and enter the desired network number.
Select Seeding. From the pop-up menu, choose the type of seeding for the Netopia R6000 Series's
LocalTalk port to use (see
You have finished configuring LocalTalk.

AURP setup

From the Network Protocols screen, select AppleTalk Setup. Then select AURP Setup and press Return. The
AURP Setup screen appears.
AURP Enable:
Display/Change Partner...
Add Partner...
Delete Partner...
Enter Free Trade Zone Name:
Accept Connections From...
Advanced Options...
AURP Allows you to connect remote AppleTalk Networks across IP.
To activate AURP and enable connections to and from AURP partners, select AURP Enable and toggle it to
On.
Viewing AURP partners
To see a table of existing AURP partners, select Display/Change Partner and press Return.
Note: The Netopia R6000 Series can define a total of 32 AURP partners.
AURP Free Trade Zone
The Free Trade Zone is an AURP security feature. It allows the Netopia administrator to specify a single
AppleTalk zone that will be the only one visible to the remote side for partners that have this option enabled.
"Routers and seeding" on page
AURP Setup
13-3).
On
Configured Partners Only