Fast Configuration Wizard - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration
2-10

Fast Configuration Wizard

1
Enter the required IP information in the dialog box.
Table 2-2 Fast Configuration Wizard – IP
Field
Network Service
Name
Signaling Host IP
Address
MPM 1 IP
Address
MPM 2 IP
Address
Subnet Mask
2
Click the Next button.
Description
The name of the Default IP Service, assigned by the
Fast Configuration Wizard.
Note: This field is displayed in all dialog boxes.
Enter the IP address of the Signaling Host. This is
the address used by endpoints for dialing in to the
MCU.
Enter the IP addresses of the media boards.
Endpoints connect to conferences via these
addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.