5.3
Checking the engine oil level
Fig. 67
Checks prior to start up – Checking the engine oil level
Protective equip-
ment:
1. Pull the dipstick out, wipe it off with a lint-
2. Pull the dipstick out again.
3. For topping up, clean the area around the
B-586-0408
4. Unscrew the cap and fill with engine oil up
5. Close the cap.
BW 213 D-5
NOTICE!
Danger of engine damage!
– If the engine is warm, shut it
down and check the oil level after
five minutes. With a cold engine
the oil level can be checked
immediately.
– Use only oil of the permitted
specification
'Engine oil' on page 171.
free, clean cloth and reinsert it to the end
stop.
ð The oil level must be between the "MIN"
and "MAX" marks.
filling port.
to the "MAX" mark.
Ä Chapter 8.3.1
Working clothes
n
Safety shoes
n
Protective gloves
n
105