Load/Transport The Machine - Fayat Group BOMAG BW 213 D-5 Operating Instruction

Concerning your safety – Load/transport the machine
3.5

Load/transport the machine

42
Use only stable loading ramps of sufficient load
bearing capacity.
Loading ramps and transport vehicle must be
free of grease, oil, snow and ice.
The ramp inclination must be less than the
gradability of the machine.
Make sure that persons are not endangered by
the machine tipping or sliding off. The
instructing person must stand within the view of
the operator, but outside the danger area.
Secure the machine with the articulation lock
after driving it on the transport vehicle or before
loading it with a crane.
Do not use damaged or in any other way
impaired lashing points.
Always use appropriate lifting and lashing
means on the lifting and lashing points.
Use lifting and lashing gear only in the pre-
scribed direction of load application.
Lifting tackle must not be damaged by machine
components.
Secure the machine on the transport vehicle
against rolling, slipping and turning over.
Loads must only be attached and hoisted by an
expert / capable person.
Use only lifting gear and lifting tackle with suffi-
cient load bearing capacity for the weight to be
loaded.
Fasten the lifting gear only at the specified
lifting points.
Danger to the life of persons if they step or
stand under a suspended load.
When lifting the machine avoid uncontrolled
movements of the load. If necessary hold the
load with guide ropes.
BW 213 D-5