Attaching The Padfoot Shells; Preliminary Remarks And Safety Notes - Fayat Group BOMAG BW 213 D-5 Operating Instruction

Setting up / refitting – Attaching the padfoot shells
9.1

Attaching the padfoot shells

9.1.1

Preliminary remarks and safety notes

Weights
Padfoot shell segment
Approx. 425 kg (937 lbs) each
1
Fig. 220
1 Weld seam identification
246
Loads are only to be attached and hoisted by
an expert/qualified person.
Do not use lifting points that are damaged or
impaired in any other way.
Only use lifting and lashing tackle with suffi-
cient load bearing capacity for the weight to be
loaded.
Always use appropriate lifting and lashing
tackle at the lifting and lashing points.
Use lifting tackle only in the specified loading
direction.
When lifting the machine, avoid uncontrolled
movements of the load. If necessary, hold the
load with guide ropes.
At least two people are required when
attaching and detaching the segments.
During production, 1, 2 or 3 weld
seams are applied to the individual
segments as identification in order
to ensure that the individual seg-
ments stay together.
B-586-0342
BW 213 D-5
Scraper
Approx. 138 kg (304 lbs) each