Fayat Group BOMAG BW 213 D-5 Operating Instruction page 263

1
Fig. 258
Rear scraper
Fig. 259
1
Fig. 260
Setting up / refitting – Removing the padfoot shells
4. Remove all three nuts (1) on both sides.
5. Remove the bolts (2) and the upper half
shells.
2
B-586-0364
6.
B-586-0361
Attach the lifting tackle to the rear scraper
as perpendicularly as possible and secure
with suitable lifting tackle.
7. Remove the two lower bolts (1) from the
half shells on both sides.
8. Lower the rear scraper to the ground or
onto a pallet and pull out from under the
machine.
B-586-0371
BW 213 D-5
NOTICE!
Components may get dam-
aged!
– Make sure no components of
the driver's stand get dam-
aged.
– Particularly in the case of
machines with cabs, make
sure that the windows do not
get damaged.
If necessary, protect the
window (e.g. with a board).
263