Fayat Group BOMAG BW 213 D-5 Operating Instruction page 167

Maintenance – Preliminary remarks and safety notes
Make sure that the engine cannot be acciden-
tally started during maintenance work.
Do not touch hot components.
Thoroughly clean the machine and engine
before starting maintenance work.
Before mounting the machine, check whether
all access steps, grips and platforms are free of
obstacles, grease, oils, fuel, dirt, snow and ice.
Use only the intended access steps and grips
to mount the machine.
For overhead maintenance work use the
access steps and working platforms provided
or other secure means.
Do not step on machine parts which are not
intended for this purpose.
Always attach the articulation lock when
working in the area of the articulated joint.
Do not leave any tools or other objects, that
could cause damage, in or on the machine.
After maintenance work has been completed,
dispose of fuels and lubricants, filters, sealing
elements and cleaning cloths in line with envi-
ronmental regulations.
After maintenance work is completed reinstall
all protective devices.
Close all maintenance flaps and doors after
maintenance work has been completed.
BW 213 D-5
The terms right/left are always in
relation to the travel direction.
167