Retightening The Fastening Of The Axle On The Frame; Retightening The Wheel Nuts; Checking The Rops - Fayat Group BOMAG BW 213 D-5 Operating Instruction

8.9.8

Retightening the fastening of the axle on the frame

Fig. 188
8.9.9

Retightening the wheel nuts

Fig. 189

8.9.10 Checking the ROPS

Maintenance – Every 1000 operating hours
Protective equip-
ment:
1. Check all fastening nuts on axle mounting
bolts for tight fit, retighten if necessary,
tightening torque: 650 Nm (480 ft·lbf).
Protective equip-
ment:
1. Tighten the wheel nuts cross-wise, tight-
ening torque: 550 Nm (405 ft·lbf).
On machines with cabin the ROPS
(roll over protection structure) is an
integral part of the cabin.
All bolted connections must comply with the
specifications and should be absolutely tight
(observe the tightening torques).
Screw and nuts must not be damaged, bent or
deformed.
BW 213 D-5
Working clothes
n
Protective gloves
n
Working clothes
n
Protective gloves
n
219