Filling The Windscreen Washer Tank; Replacing The Paper Roll In The Printer - Fayat Group BOMAG BW 213 D-5 Operating Instruction

8.12.5 Filling the windscreen washer tank

Fig. 216

8.12.6 Replacing the paper roll in the printer

Fig. 217
Fig. 218
1. Open the flap under the driver's seat on the
left hand side.
2. Check the fluid level in the provision con-
tainer, top up if necessary.
3. If there is a risk of frost, you may also fill
the provision container with an anti-freeze
mixture.
Optional equipment
1. If the status LED flashes 3 times, check the
paper.
2. Open the printer.
3. If a red line appears on the paper, install a
new paper roll.
4. Remove the used paper roll.
5. Insert the new paper roll.
B-GEN-0071
6. Close the cover.
B-GEN-0072
BW 213 D-5
Maintenance – As required
239