Fayat Group BOMAG BW 213 D-5 Operating Instruction page 117

Fig. 79
The starter switch is designed with
a re-start lock. The ignition key
must first be turned back to position
"0" before a new starting attempt
can be made.
NOTICE!
Components may get damaged!
– Run the starting process for max-
– If the engine has not started after
4. Turn the ignition key through position "II" to
position "III".
ð The starter cranks the engine.
NOTICE!
Danger of engine damage!
B-ELE-0072
– Warm up engine for a short while
BW 213 D-5
Operation – Starting the engine
imum 20 seconds without inter-
ruption and pause for a minute
between starting attempts.
two attempts, determine the
cause.
before starting work. Do not
operate the engine immediately
under full load.
117