Fayat Group BOMAG BW 213 D-5 Operating Instruction page 249

Fig. 225
Rear scraper
Fig. 226
1
Fig. 227
Setting up / refitting – Attaching the padfoot shells
3. Attach the lifting tackle to the front scraper
as perpendicularly as possible and secure
with suitable lifting tackle.
4. Remove the remaining bolts on both sides.
5. Lower the front scraper to the ground or
onto a pallet and pull to the side.
B-586-0273
6.
B-586-0338
Attach the lifting tackle to the rear scraper
as perpendicularly as possible and secure
with suitable lifting tackle.
7. Remove all nuts (1) from the fastening
bolts between the rear scraper and drum.
B-586-0274
BW 213 D-5
NOTICE!
Components may get dam-
aged!
– Make sure no components of
the driver's stand get dam-
aged.
– Particularly in the case of
machines with cabs, make
sure that the windows do not
get damaged.
If necessary, protect the
window (e.g. with a board).
249