Maintenance – Every 1000 operating hours
8.9
Every 1000 operating hours
8.9.1
Checking the ribbed V-belt
Fig. 175
208
Protective equip-
ment:
1. Park the machine in secured condition
Ä Chapter 6.8 'Parking the machine in
secured condition' on page 133.
2. Allow the engine to cool down.
3. Remove the air conditioning compressor V-
belt
Ä Chapter 8.9.2 'Replacing the air
conditioning compressor V-belts'
on page 210.
4. Swing the idler pulley back and fixate it by
inserting a locking pin into the fixing bore.
5. Take the ribbed V-belt first off the smallest
pulley.
6. Check the condition of tensioning device
and pulley (e.g. excessively worn bearings
of tensioning device, idler pulley and
reversing rollers as well as the profile wear
on the pulleys).
7. Replace any damaged parts.
BW 213 D-5
Working clothes
n
Protective gloves
n