Table of Contents
Advertisement
MultiVOIP Quick Start Guide
At this time your host MultiVOIP 110 is configured.
Proceed to the "Configuring Your Client MultiVOIP 110s"
section.
Configuring Your Client MultiVOIP 110s
If the Proprietary Phonebook option on the Phone Directory
Database dialog box was enabled, then you will need to
configure all remote H.323 endpoints as "Client" units. For
example, the MultiVOIP 110 at the company's subsidiary office
in London would need to be configured as a "Client.".
CAUTION: If you are installing a MultiVOIP 110 behind a
Firewall, the Firewall must support H.323. Refer to your
Firewall user documentation to enable H.323 support.
1. Disconnect the PC from the Command port of the Host
MultiVOIP 110 and connect it to the Command port on the
Client MultiVOIP 110.
2. Win2000/NT/98/95 users - from your desktop, click
Programs I MultiVOIP 110 I MultiVOIP 110
Configuration. The Main menu displays.
42
Advertisement
Table of Contents
