Introduction - Multitech MultiVOIP 100 MVP110 Quick Start Manual

MultiVOIP Quick Start Guide

Introduction

Welcome to Multi-Tech's stand-alone Voice/IP Gateway, the
MultiVOIP, model MVP110. The MultiVOIP 110 allows analog
voice and fax communication over an IP network. Multi-Tech's
voice/fax gateway technology allows voice/fax communication
to be transmitted, with no additional expense, over your
existing IP network, which has traditionally been data-only. To
access this free voice and fax communication, all you have to
do is connect the MultiVOIP 110 to your telephone equipment,
and then to your existing Internet connection. Once
configured, the MultiVOIP 110 then allows voice and fax to
travel down the same path as your traditional data
communications.
The MultiVOIP 110 supports the H.323 standards-based
protocol enabling your MultiVOIP 110 to communicate with
other third-party VOIP Gateways or other endpoints that
support the H.323 protocol, such as Microsoft NetMeeting
The H.323 standard defines how endpoints make and receive
calls, how endpoints negotiate a common set of audio and
data capabilities, and how information is formatted and sent
over the network. This version of the software also supports
communication with a Multi-Tech MVPGK1 Gatekeeper or an
optional 3rd party H.323 Gatekeeper which, when enabled,
maintains its own phonebook database, pre-registers all users,
controls the bandwidth, and handles all conferencing issues
such as transferring of calls.
4
Figure 1. MultiVOIP 110
® .