Table of Contents
Advertisement
Introduction
Database option is set to Client, and the IP address of the
Host MultiVOIP 110 is entered. Once all Client units are
configured, the process moves on to the "Deploying the VOIP
Network" section.
Deploying the VOIP Network
The final phase of the installation is deployment of the
network. When the remote MultiVOIP 110s are sent to their
remote sites, the remote site administrators need only connect
the units to their LAN and telephone equipment. A full Phone
Directory Database (supplied by the Host MultiVOIP 110
Proprietary Phonebook will be loaded into their units within
minutes of being connected and powered up.
For remote VOIPs that were configured with the Gatekeeper
option enabled, each MultiVOIP 110 will be registered with the
Gatekeeper (the Gatekeeper phonebook directory is NOT
downloaded to the remote units).
7
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiVOIP 100 MVP110 and is the answer not in the manual?
Questions and answers