Table of Contents
Advertisement
MultiVOIP Quick Start Guide
Building a Proprietary Phonebook Directory
27. To build your proprietary MultiVOIP 110 Phone Directory
(in an H.323 environment without the Gatekeeper option
enabled), you will first need to select the Proprietary
Phonebook option and then configure the "Host"
MultiVOIP 110 and then add the "Client" MultiVOIP 110s
(or other H.323 endpoints). Configuring the "Client"
MultiVOIP 110 is discussed later.
The first MultiVOIP 110 to be configured is designated the
"Host" and contains the proprietary phonebook database.
All subsequent MultiVOIP 110s added to the proprietary
phonebook database are designated "Clients." The host
database contains the phone numbers of all H.323
endpoints available for communication on an IP network.
This database is downloaded to each Client MultiVOIP 110
as it comes online.
28. To configure the "Host" MultiVOIP 110, make certain that
the Proprietary Phonebook and Host options are
enabled. The Host IP Address, Send Status Report to
Host, and RAS Parameters group will be disabled.
30
Advertisement
Table of Contents
