Multitech MultiVOIP 100 MVP110 Quick Start Manual page 53

20. Click OK to return to the Main menu.
21. Click Download Setup to write the new configuration to
the client unit. The Save Setup dialog box displays.
22. Select (check) the Save Current Setup as User Default
Configuration and click OK. The setup configuration is
written to the MultiVOIP 110. After the setup is written to
the MultiVOIP 110, it reboots.
23. Check that the Boot LED on the MultiVOIP 110 is off after
the download is complete. This may take several minutes
as the MultiVOIP 110 reboots.
24. You are returned to the Main menu.
Your MultiVOIP 110 is operational at this time.
Repeat the process for each of the client units. When all
clients have been configured, go to "Deploying the VOIP
Network."
Configuring MultiVOIP Clients
53