Multitech MultiVOIP 100 MVP110 Quick Start Manual page 50

MultiVOIP Quick Start Guide
on the network. This is called Jitter. To compensate for this
effect, the MultiVOIP 110 uses a Dynamic Jitter Buffer. The
Jitter Buffer allows the MultiVOIP 110 to wait for delayed
voice packets by automatically adjusting the length of the
Jitter Buffer between configurable minimum and maximum
values. An Optimization Factor adjustment controls how
quickly the length of the Jitter Buffer is increased when
jitter increases on the network. The length of the jitter
buffer directly effects the voice delay between MultiVOIP
110 gateways.
The Minimum Jitter Value default setting is 150
milliseconds, the Maximum Jitter Value default setting is
300 milliseconds, and the Optimization Factor default
setting is 7.
If your country/region is not the default USA, click the
Regional tab and proceed to step 17. Otherwise, proceed
to step 18 to begin building your phone directory database.
50