Multitech MultiVOIP 100 MVP110 Quick Start Manual page 37

(+) and the Add/Edit Phone Entry dialog box displays
again.
44. Enter the phone number for the remote (Client) MultiVOIP
110 in the Station Information group Phone Number box
(e.g., 202).
45. Click inside the Description box and enter a description
for the remote MultiVOIP 110 phone number for Channel
2. For example, "London Office 2."
46. In the Station Identification group, select HUNT GROUP
#2 from the Hunt Group drop-down list, enter the London
Office 2's IP Address (202.056.039.100), and accept the
H.323 industry standard Port value (1720) used to
communicate with other H.323 endpoints.
Note: Depending on your requirements, you may want
calls that cannot make a connection to London Office 1
(Hunt Group #2) to roll over to the New York office instead.
In this case, you would configure that phone entry to be
listed as a member of HUNT GROUP #1.
47. Click OK and you are returned to the Phone Directory
Database dialog box which now includes the remote
phone number and related information in the Phone
Configuring the MultiVOIP
37