Table of Contents
Advertisement
this happens, hang up and dial again. The default setting
is 2 seconds.
14. The Ring Count FXS box enables you to set the
maximum number of rings output on the FXS interface
before hanging up and releasing the line to another call.
The default setting is 8 rings.
Note: Zero (0) means no rings - caller hears a busy tone.
15. The Voice/Fax tab displays the parameters for the voice
gain, DTMF (Dual Tone Multi-Frequency) gain, voice
coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error
Correction.
16. You can set up the input and output voice gain so that the
volume can be increased or decreased. Input gain
modifies the level of the audio coming in to the voice
channel before it is sent over the Internet to the remote
MultiVOIP 110. Output gain modifies the level of the audio
being output to the device attached to the voice channel.
Configuring the MultiVOIP
17
Advertisement
Table of Contents
