Deploying The Voip Network; Remote Site Administrator - Multitech MultiVOIP 100 MVP110 Quick Start Manual

MultiVOIP Quick Start Guide

Deploying the VOIP Network

For a Proprietary Phone Directory database, the VOIP
administrator can deploy the pre-configured client MultiVOIP
110s to their remote sites. The remote site administrators need
only connect power to the pre-configured MultiVOIP 110,
connect the MultiVOIP 110 to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
With the Gatekeeper option enabled on the Phone Directory
Database dialog box, all MultiVOIP 110s are configured as
"Host" and cannot be downloaded. In this case, each
MultiVOIP 110 Phone Book will be programmed with phone
numbers for its own channels. These phone numbers are
registered with the H.323 Gatekeeper (See the "Registering
with a Gatekeeper Phone Directory" section discussed earlier.)

Remote Site Administrator

The following steps are for MultiVOIP 110 H.323 endpoints.
For non-MultiVOIP 110 H.323 endpoints, refer to the
appropriate installation documentation.
1. Unpack your MultiVOIP 110.
2. Connect one end of the power supply to a live AC outlet
and connect the other end to the Power connection on
your MultiVOIP 110 (See Figure 5).
54