Configuring Your Host Multivoip - Multitech MultiVOIP 400 MVP400 User Manual

MultiVOIP 400 User Guide

Configuring Your Host MultiVOIP

The following software loading procedure does not provide every screen or option in the loading
process. The assumption is that a technical person with a thorough knowledge of Windows and the
software loading process is doing the installation.
If you are installing a MultiVOIP behind a firewall, add the following UDP ports to your firewall.
Q.931 Signaling, Ch1[900]
Q.931 Signaling, Ch3[904]
Status [5000]
Ch1 RTP [5004]
Ch2 RTP[5006]
Ch3 RTP[5008]
Ch4 RTP[5010]
Refer to your firewall user documentation to enter and open these ports.
1. Make certain that your MulitVOIP 400 has been properly cabled and that the power is turned on
and the boot light is off.
2. Insert the MulitVOIP 400 CD into your CD-ROM drive. The CD should start automatically. It may
take 10 to 20 seconds for the MultiTech CD installation window to display.
If the MultiVOIP 400 CD window does not display automatically, click My Computer, then right
click the CD ROM drive icon, click Open, and then click the Autorun icon.
3. When the MultiVOIP 400 CD dialog box displays, click the Install Software icon.
4. The Select Software dialog box is displayed. Select the Proprietary Software option.
24
Q.931 Signaling, Ch2 [902]
Q.931 Signaling, Ch4 [906]
Ch1 RTCP [5005]
Ch2 RTCP [5007]
Ch3 RTCP [5009]
Ch4 RTCP [5011]