Multitech MultiVOIP 100 MVP110 Quick Start Manual page 19

milliseconds, for delayed or out of order fax packets. The
range of allowable Jitter Values is 0 to 400 with a default of
400 milliseconds.
If you do not plan to send or receive faxes on a given
voice/fax channel, you can disable faxes in the Fax group.
19. You can enable the voice/fax advanced features by
clicking (checking) the silence compression, echo
cancellation, or forward error correction options.
The Silence Compression option defines whether silence
compression is enabled (checked) for this voice channel. If
silence compression is enabled, the MultiVOIP 110 will not
transmit voice packets when silence is detected, thereby
reducing the amount of network bandwidth that is being
used by the voice channel.
The Echo Cancellation option defines whether echo
cancellation is enabled (checked) for this voice channel. If
echo cancellation is enabled, the MultiVOIP 110 will
remove echo which improves the quality of sound.
The Forward Error Correction (FEC) option defines
whether forward error correction is enabled (checked) for
this voice channel. The FEC feature allows some of the
voice packets that were corrupted (or lost) to be
recovered. FEC adds an additional 50% overhead to the
total network bandwidth consumed by the voice channel.
20. The Billing/Misc tab displays the parameters for auto call,
automatic disconnection, billing options, and dynamic jitter
buffer.
Configuring the MultiVOIP
19