Multitech MultiVOIP 100 MVP110 Quick Start Manual page 10

MultiVOIP Quick Start Guide
telephone, fax machine, or Key Telephone System (KTS)
to your MultiVOIP 110, connect the smaller end of a
special adapter cable (supplied) to the Voice/Fax Channel
1 FXS connector on the back of the MultiVOIP 110 and the
other end to the station device.
5. Turn on power to the MultiVOIP 110 by setting the power
switch on the right side to the On position. Wait for the
Boot LED on the MultiVOIP 110 to go off before
proceeding. This may take a couple of minutes.
10