Multitech MultiVOIP 100 MVP110 Quick Start Manual page 44

MultiVOIP Quick Start Guide
The default Frame Type is TYPE_II. If this does not match
your IP network, change the Frame Type by clicking on the
drop-down arrow. The Frame Type choices are TYPE_II
and SNAP.
4. In the Port Address group, enter the IP Address and IP
Mask. In the Gateway Address group, enter the gateway
IP address for the client unit.
The IP Address is the unique IP address that you assign to
the MultiVOIP 110, and the Gateway Address is the IP
address of the device (such as a network router)
connected to the Internet/Intranet.
Click OK when you are finished. The Main menu displays.
5. From the Main menu, click Voice Channels to display the
Channel Setup dialog box. The Channel Setup dialog
box displays. The four tabs in this dialog box define the
channel interface, voice/fax parameters, Billing/Misc
parameters, and regional telephone parameters for each
channel.
Configure each channel for the type of interface you are
44