Multitech MultiVOIP 100 MVP110 Quick Start Manual page 52

MultiVOIP Quick Start Guide
18. From the Main menu, click Phone Book to display the
Phone Directory Database dialog box. Make certain the
Proprietary Phonebook option is enabled and in the
Database Type group, select the Client option. The Host
IP Address box becomes active.
Note: After you have enabled the Client option, the Client
Status button is replaced by the Update button. Once
your Phone Directory database has been established, you
can click this button to refresh the entries in the Phone
Directory Database window.
19. Enter the IP address (204.022.122.118) of the New York
Office MultiVOIP 110 in the Host IP Address box and
enable the Send Status Report to Host so that status
reports are sent to the Host MultiVOIP 110.
Note: In a Dial-On-Demand (DOD) network, you should
leave Send Status Report to Host disabled (not
checked). This allows the router to disconnect whenever
there is no voice activity. Note that Clients with Send
Status Report to Host disabled will show up as
"Unknown" when viewing Client status on the Host.
52