Figure 12. Securing the Spring Clips
4. From the rear of the cabinet, secure the rail in place using one M5 screw on each rail.
Figure 13. Installing the M5 Screw
Installing the DAE on the rails
About this task
WARNING:
The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal
injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a
mechanical lift and/or help from another person.
Steps
1. With help from another person, lift the enclosure and, from the front of the cabinet/rack, slide the enclosure onto the rails.
24
Installation Procedures
Left Rear
n t
F r o
CL5868
Right Rear
CL5869