Appendix A: Configuration Worksheet; Configuration Worksheet - Dell EMC Unity All Flash Installation And Service Manual

This appendix contains a worksheet to collect and record information and to use as a guide to start setting up your storage
system.
Topics include:
Topics:
•

Configuration worksheet

Configuration worksheet
Use this worksheet to collect and record information to start setting up your storage system using the following:
● Online Support
● Connection Utility
● Unisphere Initial Configuration Wizard
This worksheet should be used in conjunction with the information in the previous chapter. Refer to the Connection Utility and
Unisphere Online Help for additional guidance for setting up your storage system. In the respective user interface, click the ?
icon to display its online help.
NOTE: Sites with restricted Internet access must obtain the Connection Utility software and product license keys in
advance to configure the system. Go to the Unity Info Hub at
Online Support
Enter the following information related to your Online Support account:
Item
Online Support account:
● Go to support.emc.com to create your Online Support account.
● Your username and password will be required for the Unisphere
Initial Configuration wizard.
Connection Utility
Enter the following information related to the system management address:
Item
Storage system Product ID / Serial Number:
● Refer to the serial number tag on the front of the DPE component
for the system ID.
● Use this ID in the Connection Utility to auto-discover a storage
system on a subnet.
Name:
● If you obtained the system's IP address through DHCP, use the
system serial number for the name.
Management IP Address:
102 Configuration Worksheet
Configuration Worksheet
https://www.dell.com/unitydocs
Value
Value
A
for detailed instructions.