Dell EMC PowerStore Quick Start Manual

Quick Start
Before you begin
□
Plan your installation: Read the
PowerStore Planning Guide at
http://dell.com/powerstoredocs.
□
Download the PowerStore Quick
Start Guide Discovery Utility at
http://dell.com/powerstoredocs.
This tool helps you discover your
appliances within your network, if
you are remote.
□
Create a support account at
https://dell.com/support. You need
this account later in the
configuration process to activate
software licenses and configure Dell
EMC SupportAssist.
Note: If your appliance arrived pre-racked, begin installation at Step 5 of this guide.
Installation workflow
Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, Dell EMC and other trademarks are
trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
PowerStore Quick Start Guide
Download the
Discovery
Utility
Create a
Support Account
Record
Dell Service
Tag
Plan Your
Installation
Configure
Network
Record
Network
Addresses
Get Lift
Assistance
□
Configure network: Depending on
the model of your system, read the
PowerStore Networking Guide for
PowerStore X Models or the
PowerStore Networking Guide for
PowerStore T Models at
http://dell.com/powerstoredocs.
□
Record network addresses:
Download the networking guide for
your model from
http://dell.com/powerstoredocs,
and work with your network
administrator to complete the Initial
Configuration Worksheet section.
□
Get lift assistance: Obtain the help
of a second person to install the
enclosure into the rack or use a
mechanical lift.
P/N 300-015-629 Rev 04