Table of Contents
Advertisement
Item
● Management IPv4 and/or IPv6 address to assign to the storage
system.
Subnet Mask (IPv4 only):
● IP address mask that identifies the range of IP addresses in the
subnet where storage system is connected.
Gateway:
● Default gateway IP address of the storage system management
interface.
Prefix Length (IPv6 only):
● The number of significant bits in the address that will be used for
routing purposes.
Unisphere
Enter the following information to initially log into Unisphere:
Item
Unisphere login information:
● When logging into Unisphere for the first time, use the default
system account user name and password
Initial Configuration Wizard
The Initial Configuration Wizard walks you through the initial set up of Unisphere and prepares the system for use. The first time
the wizard launches, you will need to access the End User License Agreement (EULA) and install Unisphere licenses. Use the
following list of screens and related actions as a guide to the initial configuration process.
Screen Name
Copyright
Unisphere Password
Unisphere Licenses
DNS servers
NTP Servers
FAST Cache and Storage Pools
Alert Settings
Proxy Server
EMC Support Credentials
Action
Accept the EULA.
Set the Unisphere admin and service passwords
Obtain your Unisphere license file online and upload your license file.
(Manual configuration) Enter the network name or IP address of one or more DNS
servers.
NOTE:
A DNS server is required for EMC Secure Remote Services (ESRS).
Enter the network name or IP address of one or more NTP (Network Time
Protocol) servers.
NOTE:
An NTP server must be configured before you can create a NAS
server with SMB (CIFS) shares that use Windows Active Directory (required
for multiprotocol). It is also recommended that you configure an NTP server on
both systems in order for the replication feature to work correctly.
Create FAST Cache (if supported) and storage pools, or configure these items
later.
Configure alert notifications by entering the email addresses to which alerts should
be sent, set the severity level for these alerts, and configure an SMTP server.
(optional) Enter the Protocol, IP address, and Proxy Server username and
password.
Enter your EMC Online Support username and password.
Value
Value
● User Name: admin
● Password: Password123#
Configuration Worksheet
103
Advertisement
Table of Contents
