Installing A Wlan Module; Installing A Wwan Module (Mini-Pcie) - Nexcom nROK 7251 Series User Manual

Chapter 4: System Setup

Installing a WLAN Module

1. Locate the WLAN mini PCI Express slot (CN3 or CN4). Insert the module
into the mini PCI Express slot at a 45 degrees angle until the gold-plated
connector on the edge of the module completely disappears inside the
slot. Then fasten screws into the mounting holes to secure the module.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.

Installing a WWAN Module (Mini-PCIe)

1. Locate the WWAN mini PCI Express slot (CN6). Insert the module into
the mini PCI Express slot at a 45 degrees angle until the gold-plated
connector on the edge of the module completely disappears inside the
slot. Then fasten screws into the mounting holes to secure the module.
CN3
CN4
50
CN6
nROK 7251 Series User Manual