Chapter 3: System Setup
C
3: s
haPter
ystem
Removing the Top Cover from the Chassis
1. Remove the 7 screws from the top cover, then lift up the system chassis
box to access the mainboard.
Prior to removing the top cover, make sure the unit's power
CAUTION!
CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
23
Installing Memory Module & Storage Drive
1. With the top cover removed, install a memory module and an M.2 storage
drive to the SO-DIMM and M.2 slot respectively.
XPPC 16-100 User Manual