Chapter 3: System Setup; Removing The Top Cover From The Chassis; Installing Ddr, Ssd, Wifi Module - Nexcom XPPC 16-200 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Top Cover from the Chassis

1. Remove the 7 screws from the top cover, then lift up the system chassis
box to access the mainboard.
Prior to removing the top cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
26

Installing DDR, SSD, WiFi module

1. With the top cover removed, install DDR, SSD, WiFi module.
M.2 E-KEY
DDR4
M.2 M-KEY
XPPC 16-200 User Manual