Common Setting - UNI-T UPO2102 User Manual

User's Manual

17.4 Common Setting

Press MENU key to enter menu list, press Utility key to set the common parameter of channel, as shown in
Table 17-3.
Table 17-3
Function Menu
CHA and CHB Setting
 Instruments.uni-trend.com
Submenu Function Setting
Channel output OFF, ON
Channel inverse OFF, ON
Load 50Ω,high resistance
Amplitude limit OFF, ON
Upper limit of
amplitude
Lower limit of
amplitude
Description
Set the status of channel output. The
default is OFF.
Set the status of channel inverse. The
default is OFF.
Set the channel's load. The default is high
resistance.
Set the status of amplitude limit. The
default is OFF.
Set the upper limit of channel amplitude
output.
Set the lower limit of channel amplitude
output.
MSO/UPO2000 Seri es
125 / 137