UNI-T UPO2102 User Manual page 101

User's Manual
(6) FFT – Detecting Mode
The detecting mode is to set the way to display the sampling points of the raw data after FFT
operation. The display mode can be set to normal, average, maximum hold and minimum hold. The
sampling point mode can be set to + peak, - peak, average and sampling, as shown in Figure 15-3.
Display Mode
a. Normal: the spectrum waveform displays all sampled values, the corresponding spectrum waveform
 Instruments.uni-trend.com
Figure 15-1
Figure 15-2
Figure 15-3
MSO/UPO2000 Seri es
101 / 137