UNI-T UPO2102 User Manual page 10

User's Manual
Build in 50MHz double channel function/arbitrary waveform generator (only for MSO-S), it supports real-

time loading data on the screen of the oscilloscope into AWG arbitrary waveform output
Bode Plots loop test analysis function

Up to 120,000 frames of hardware real-time waveform continuous recording and analysis function and

support USB storage device export.
Waveform operation: add, subtract, multiply, divide, digital filter, logical operation and advanced

operation
4M point enhance FFT, support frequency setting, waterfall curve, detection setting and mark

measurement
Automatic measurement of 36 waveform parameters

Multi-Scopes 2.0 supports multiple channels independent trigger fluorescent display

Multiple channels with independent hardware 7 digits frequency meter

DVM supports multiple channels independent AC/DC TRMS (true virtual value) measurement

Abundant trigger functions: edge, pulse width, video, ramp, runt pulse, over-amplitude pulse, delay,

timeout, duration, setup hold, Nth edge and pattern trigger
Region trigger function for capturing occasional signal and observing complex signal

Protocol trigger and decoding trigger with standard RS232, I

FlexRay
Ultra Phosphor display effect with 256 level gray scale display

8 inch high-definition capacitive touch（800×480）screen, support gesture operating click, slide, zoom,

edit and drag
Multiple peripheral interface: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG

output and VGA
Supporting SCPI programmable standard command

Support WEB access and control

 Instruments.uni-trend.com
C, SPI and optional CAN, CAN-FD, LIN,
2
MSO/UPO2000 Seri es
10 / 137