UNI-T UPO2102 User Manual page 62

User's Manual
User-defined
Measurement
Statistical
Analysis
Automatic Measurement Menu (Page 2)
Function Menu
Selection
Indicator
Indicator
Delete
8.3 All Parameter Measurement
Press MEASURE to pop out all parameter to measuring all parameters, as shown in Figure 8-1.
 Instruments.uni-trend.com
area
A user-defined parameter selection interface pops up on the
waveform display area, adjust the Multipurpose knob to select and
press the knob to confirm to show the parameter on the screen.
Press the user defined key again to close the user-defined
parameter choice box.
OFF Turn off measurement statistical function
Automatic calculates and displays the current user defined
parameters, the average, maximum, and minimum.
Extremum
Only enabled when user defined parameters display on the screen.
Automatic calculates and displays the current user defined
parameters, the average, standard deviation and measurement
Difference
times.
Only enabled when user defined parameters display on the screen.
Setting Description
Press Multipurpose knob to select the parameter of selection
indicator.
Off Turn off the indicator function
Indicate the physical significance of the indicator parameter
On
intuitively by line
Clear all the user-defined parameter
MSO/UPO2000 Seri es
62 / 137