User-Defined Parameter - UNI-T UPO2102 User Manual

User's Manual
All parameters are always marked the same color with the current measuring channel (the main source).
When "----" is shown, it indicates that the current source has no signal input, or the measurement result is
not within valid range (too large or too small).

8.4 User-defined Parameter

Press MEASURE to pop out user defined menu, as shown in Figure 8-2.
Rotating the Multipurpose knob to select parameter and press the knob to confirm. For every selected
parameter, a * symbol will appear in front of the parameter. The user defined parameter will display on the
bottom of the screen, it can measuring 5 parameters at the same time.
User can select difference value, extremum to perform measuring statistic to the user-defined
parameters.
 Instruments.uni-trend.com
Figure 8-1
Figure 8-2
MSO/UPO2000 Seri es
63 / 137