UNI-T UPO2102 User Manual page 105

User's Manual
Sinc
Tan
Sqrt
Exp
Log
Ln
floor
ABS
acos
asin
atan
sinh
tanh
cosh
ceil
fabs
d. Opt: The function of each operator as shown in Table 15-2.
Table 15-2
Function Name
+, -, *, /, ^
（ ）
＜, ＞ , ==, !=
|| , &&
0 ~ 9, .
 Instruments.uni-trend.com
Calculating the normalization value of the selected source.
Calculating the tangent of the selected source.
Calculating the square root of the selected source.
Calculating the exponent of the selected source.
Calculating the logarithm of the selected source.
Calculating the logarithm of the selected source.
The selected source is round down to an integer.
The selected source take the absolute value (integer absolute value).
Calculating the arccosine of the selected source.
Calculating the arcsine of the selected source.
Calculating the inverse tangent of the selected source.
Calculating the hyperbolic sine of the selected source.
Calculating the hyperbolic tangent of the selected source.
Calculating the hyperbolic cosine of the selected source.
The selected source is round up to an integer.
The selected source take the absolute value (floating number absolute
value).
Description of Function
Mathematical operator: add, subtract, multiply, divide, exponent
Parenthese is used to raise the priority of operations in parentheses.
Relation operator: greater than, less than, equal to, unequal to
Logical operator：or, and
Perform digit operation
MSO/UPO2000 Seri es
105 / 137