UNI-T UPO2102 User Manual page 97

User's Manual
Set ID parity bit to "yes" or "no". If "yes" is selected, it includes parity bit and ID; if "no" is selected, parity
bit and ID is not include.
(7) Setup Data Length
Set whether display the setting menu of data length. It can set yes or no.
Yes: Display the setting menu of data length
No: The setting menu of data length is not display.
(8) Data Length
Set LIN data length, the range can set to1～8. It is only valid when " Setup data length" is "Yes".
14.7 FlexRay Decoding
(1) Bus Decoding
Refer to RS232 Bus Decoding.
(2) Information Source
Set LIN protocol trigger source, which can be CH1, CH2, CH3, CH4 or D0-D15. The current selected
source display on the right corner of the screen. The source supports display and select digital channel
only when the digital channel is opened in LA.
Note: Only the channel that has been connected to the signal, select it as the trigger source that can get
the stable trigger and correct decoding.
(3) Polarity
Polarity can set to BM, BDiff or BP.
(4) Channel Type
Set signal channel type to A or B.
(5) Bit Rate(bps)
Set bit rate, which can be 2.5M, 5M, 10M or user-defined. User can input customized bit rate when "user-
defined" is selected.
 Instruments.uni-trend.com
MSO/UPO2000 Seri es
97 / 137