Clock Setting; Data Storage; Data Viewing; Tested Object Numbering - UNI-T UT279 Operating Manual

3 Clock Setting

In function menu page, press
press MEM or tap "Clock Setting" icon to enter clock setting page, press
tap " " icon to move the cursor to year, month, day, hour, minute, press
tap " " icon to adjust date and time. Press
then press MEM or tap "Return" icon to return to function menu page.

4 Data Storage

In data measurement page, when pressing
tester will enter data storage status and the LCD will display "NO.XXXHD", the
tester stores the current, waveform, time, tested object numbering to the memory,
"NO.XXX" represents the number of groups of stored data, press
other icons to exit.

5 Data Viewing

In function menu page, press
press MEM or tap "Data Viewing" icon to enter data viewing page, press
scroll through data. Press
or tap "Return" icon to return to function menu page.

6 Tested Object Numbering

In function menu page, Press
Numbering" icon, then press MEM or tap "Tested Object Numbering" icon to
enter the page of tested object numbering, press
the cursor, press
to move the cursor to "Return" icon, then press MEM or tap "Return" icon to
return to function menu page.

7 Data Deletion

In function menu page, press
to move the cursor to "Clock Setting" icon, and
to move the cursor to "Return" icon, then press MEM
or tap " " icon to change the numbering of tested object, press
to move the cursor to "Data Deletion" icon, then
to move the cursor to "Return" icon,
or tapping "Data Storage" icon, the
to move the cursor to "Data Viewing", then
to move the cursor to "Tested Object
8
again or tap
or tap " " icon to move
or
or
to