UNI-T UPO2102 User Manual page 133

User's Manual
The record function is invalid in
Roll mode！
There is no parameter can be use,
please select user-defined
measurement parameter！
Data storage is successful！
Data storage is failed！
Loading file is successful！
Loading file is failed！
Invalid expression！
Screenshot is successful！
The update path was not fund！
The update file was not fund！
The filename cannot be empty！
Language package is error, please
check the language package！
Clear data is successful!
In Multi-Scopes, this function is
invalid！
The program is in updating, do not
reboot！
It cannot canceled during
update！
Update is failed, please check the
update package and version！
Update is completed, reboot
system now?
It is in recording, please exit the
recording！
In Multi-Scopes mode, the
adjustment is up to extremity！
 Instruments.uni-trend.com
It will be prompt when the oscilloscope operates recording
waveform in Roll mode.
It will be prompt if there is no user-defined parameter when turn on
measurement statics.
It will be prompt when save waveform, setting file, arbitrary wave is
completed.
It will be prompt when save waveform, setting file, arbitrary wave is
failed.
It will be prompt when recall saved setting or waveform and it
appeared in storage.
It will be prompt if it not appeared in storage when recall saved
setting or waveform.
It will be prompt when MATH advanced operation and application
expression is invalid.
It will be prompt when save picture or use PrtSc to save picture is
completed.
It will be prompt if USB is not insert to provide the update file when
the instrument is in updating.
It will be prompt if USB cannot provide the update file when the
instrument is in updating.
It will be prompt if the filename is empty when save waveform,
setting file, arbitrary wave, recording waveform.
It will be prompt when language package occurs error.
It will be prompt when clear data is finished.
It will be prompt when using extend window, recording waveform,
reload waveform, Pass/Fail test, MATH, DECODE, LA, drawing
rectangle in Multi-Scopes mode.
It will be prompt when the program is in updating.
It will be prompt if press cancel function when the program is in
updating.
It will be prompt if the update program is not complete when the
program is in updating.
It will be prompt when the program is upgraded.
It will be prompt if press other function key when in recording
waveform.
It will be prompt when adjusting horizontal time base is slow to
20ms.
MSO/UPO2000 Seri es
133 / 137