[Utility] Setting; Parameters Of Measurement; Timer; Beep - UNI-T UT3550 User Manual

[Utility] Setting

5.1

Parameters of Measurement

All the settings related to the measurement are operated on the <TEST> page. [TRIGGER], [FUNC],
[R-RANGE], [V-RANGE] can also be set on the <TEST> page. For the setting of these parameters,
please refer to chapter 4.1 [Test] Measurement Page.
The rest of the settings include the following parameters,
 Timer – delayed before measurement of external trigger
 Beep – beep alarm
5.1.1

Timer

In order to conveniently collect data into internal storage, user can use Timer collect function. When
test is ready, the instrument will start timer, when it count to 0, it will keep the current data into
internal storage.
User can view the collected data in <VIEW DATA> page.
Setting Steps of Timer
1. press【Utility】key to enter setup page；
2. Use the cursor to select【Timer】filed；
3. Use numeric keypad to enter time, unit is second.
5.1.2

Beep

The beep function is effective only when comparator function is turned on.
Beep function has three settings: OK (qualified beep), NG (unqlified beep) and OFF (turn off beep).
OK: the buzzer will sound when the sorting result is qualified
NG: the buzzer will sound when the sorting result is unqualified
Setting steps
1. Press【Test】or【Utility】key，and select【COMP SET】with the function key at the bottom
of the screen to enter 【COMP SET】page;
2. Use the cursor key move the cursor to the【Beep】filed；
According to user's needs, use the function keys at the bottom of the screen to select
3.
OK, NG and OFF.
Figure 5-1 <SETUP> Page
20
UT3550 Battery Tester Users Manual