UNI-T UPO2102 User Manual page 78

User's Manual
Last status: After the power switch on the rear panel of the oscilloscope is turned on, the oscilloscope

will rebooting with the last shut down status. If the last shut down is turned off by soft key, then the
oscilloscope should press the soft key to power on; if the last shut down is turned off directly, then it will
power on directly.
(15) Option Function
Option Function is the entrance of activating option, it can select to activate single option (as shown in
Figure 13-1) or activate all (as shown in Figure 13-2). All options supports free trial for 145 hours as shown
in Figure 13-1. After free trial, the option should purchase to use. Activating option should select the
purchased option and acquire the corresponding license and save it into USB and then insert to the
instrument. MSO2000+ option supports UART, I
LA.
 Instruments.uni-trend.com
C, SPI, CAN, CAN_FD, LIN, FlexRay, bode diagram and
2
Figure 13-1
Figure 13-2
MSO/UPO2000 Seri es
78 / 137