Touch Screen - UNI-T UPO2102 User Manual

User's Manual
"Pass/Fail Test" for more details.
(6) Reference waveform: Tap reference waveform icon in HOME menu to enter REF Load menu to
operating recall waveform.
(7) Decoding: Tap decoding icon in HOME menu to enter Decode menu to operating decoding. Refer to
"Protocol Decoding" for more details.
(8) Bode diagram: Tap bode diagram icon in HOME menu to enter bode diagram menu to setup. Refer
to "Bode Diagram" for more details.
(9) Drawing rectangle: Tap drawing rectangle icon in HOME menu to enter drawing rectangle menu to
setup. Refer to "Drawing Rectangle" for more details.
(10) Frequency meter: Tap frequency meter icon in HOME menu to turn on/off frequency meter quickly.
The frequency meter status of all channels is turned on by default. When the frequency meter is
turned on, the icon is highlighted.
(11) Voltmeter: Tap voltmeter icon in HOME menu to enter voltmeter menu to setup state of voltmeter,
source and mode. The voltmeter status of all channels is turned on by default.
a. Voltmeter state: ON or OFF
b. Source: Set the measuring source of multimeter, which can set to CH1, CH2, CH3 or CH4.
c. Mode: AC, DC, AC & DC.
(12) Help: Tap help icon in HOME menu to enter help menu.
13. Analog channel icon and waveform: Display channel identification and waveform of CH1～CH4, the color
of channel identification will be the same with waveform.

4.7 Touch Screen

MSO2000CS+ series provides 8 inch super capacitive touch screen, multiple point touch control and gesture
control. MSO200CS+ has easily operating system with flexible and high sensitive touch screen features for
great waveform display and excellent user experience.
Touch control function includes tap, squeeze, drag and drawing rectangle.
Hint: The menu displayed on the screen of the oscilloscope can use the touch control function.
(1) Tap
Use one finger to slightly tap icon or word on the screen as shown in Figure 4-8. Tap gesture can use for:
Tap menu displayed on the screen and then to setup.

Tap the function guide icon on the left corner of the screen to enable it.

Tap to pop out numeric keypad to set parameter.

Tap virtual keyboard to set label and file name.

Tap message to pop out close button on the right corner to close it.

Tap other window displayed on the screen to setup.

 Instruments.uni-trend.com
MSO/UPO2000 Seri es
22 / 137