UNI-T UPO2102 User Manual page 89

User's Manual
It includes frp proxy network server IP address, web_port，pic_port proxy port and ctrl_port proxy port.
Click to change frp setting，that is to edit proxy IP address, web_port，pic_port，ctrl_port，as shown in
Figure 13-13.
Click the confirmation after the input is completed, it can continuous to access according to the new
modified frp proxy IP address information (in correct configuration).
Note: If each oscilloscope is connect with the same frp server, then web_port，pic_port，ctrl_port of each
oscilloscope should be consistent , otherwise frp proxy fails and cannot access.
If frp proxy is modified, it cannot access by local area network IP: 9000. If user need to recover the normal
access, press the DEFAULT button on the oscilloscope panel to reset the configuration and then use IP:
9000 port to access.
(4) Password Setting
Password setting is for the user account to log in. After the user changes the login password, the user
needs to use the new password for the next login. If you forget the password, reset the password by
pressing the DEFAULT button on the oscilloscope panel.
 Instruments.uni-trend.com
Figure 13-12
Figure 13-13
MSO/UPO2000 Seri es
89 / 137