Rear Wheels; Installing Rear Wheels - Permanent Wheel Axle - Physipro XL5 Owner's Manual

ENGLISH

6. Rear Wheels

6.1 Installing Rear Wheels - Permanent Wheel Axle

Make sure the positioning device E is inserted in plate F including locking
1.
device G;
Secure it firmly in place with the lock washer D and H and nut C and I ;
2.
Insert axle A in the positioning device E with the wheel hub B;
3.
4. Tighten nut J with a 3/4" monkey wrench while holding axle A with a 3/4"
socket wrench.
The size/position of the front casters, the position of the brakes as well
as the anti-tippers directly relate to the stability of the wheelchair. Any
change to the rear wheel size/position may cause the wheelchair to
decrease in stability. Please refer to section 6.4 to perform the necessary
adjustments. These adjustments MUST be performed by a qualified
technician.
Verify systematically the stability of the wheelchair. It might be necessary
to change the horizontal position of the rear wheel. Refer to section 6.4.
Figure 14 : Installing Rear Wheels - Permanent Wheel Axle
18
XL5 / XL5 CI wheelchair