Xilinx IBERT ML628 Getting Started Manual page 48

Creating the GTX IBERT Core
11. Enter the information shown here and in
X-Ref Target - Figure 1-52
12. Leave page 4 unchanged and click Next.
13. Enter the information shown here and in
48
• MGT0_110: CUSTOM1 / 6.5 Gps
• MGT1_110: CUSTOM1 / 6.5 Gps
• MGT2_110: CUSTOM1 / 6.5 Gps
• MGT3_110: CUSTOM1 / 6.5 Gps
Figure 1-52: CORE Generator - IBERT GTX Customization - Page 3
• MGT0_100: MGTREFCLK0 100
• MGT1_100: MGTREFCLK0 100
• MGT2_100: MGTREFCLK1 100
• MGT3_100: MGTREFCLK1 100
www.xilinx.com
Figure 1-52, then click Next:
Figure 1-52, then click Next:
ML628 IBERT Getting Started Guide
UG806 (v1.0) May 20, 2011
UG806_c1_52_041411