Xilinx IBERT ML628 Getting Started Manual page 42

Creating the GTH IBERT Core
13. Verify the information shown here and in
X-Ref Target - Figure 1-44
14. The generation process will take a few minutes. When complete, a Readme window
Compare the .v and .ucf files generated here with the identically named source files
provided with the ML628 board (see
how the SuperClock-2 control module is integrated and the system clock is connected.
42
• Production Silicon (v2.1): Selected
Figure 1-44: CORE Generator - IBERT GTH Customization - Page 5
will appear (Figure 1-45). Review the information presented and locate the following
files:
•
ibert_v6_q117.ngc
•
example_ibert_v6_q117.v
•
example_ibert_v6_q117_top.ucf
www.xilinx.com
Figure 1-44, then click Generate.
Source Directories and Files, page
ML628 IBERT Getting Started Guide
UG806_c1_44_050411
32) for details on
UG806 (v1.0) May 20, 2011