Xilinx IBERT ML628 Getting Started Manual page 39

X-Ref Target - Figure 1-39
8.
9.
ML628 IBERT Getting Started Guide
UG806 (v1.0) May 20, 2011
Figure 1-39: Select IBERT Core
Click on the Customize and Generate link under the Actions heading
After a few seconds page 1 of the IP customization window will appear. Enter the
information shown here and in
• Component Name: ibert_v6_q117
• Generate Bitstream: unchecked
• Add RXUSERCLK probe: unchecked
• GTH Naming Style: MGT m n
• MGT Column: Right
• Frequency: 25 MHz
• Pin Location: UNASSIGNED
• Pin Input Standard: LVCMOS25
www.xilinx.com
Creating the GTH IBERT Core
Figure 1-40, then click Next:
UG806_c1_39_051111
(Figure 1-39)
39